Connecting to MPLAB PICkit 4

Currently loaded versions:
Application version...........00.07.07
Boot version..................01.00.00
Script version................00.04.87
Script build number...........f3faf1ee5c
Tool pack version ............1.10.1305
PICkit 4 is supplying power to the target (3,25 volts).
Target device PIC24FJ256GB106 found.
Device Revision Id  = 0x4


*****************************************************


The following memory area(s) will be read:
program memory: start address = 0x0, end address = 0x2abf7
configuration memory
Read complete
Loading code from .../Microchip/PICkit 3/IMAGE_PK3_012510/IMAGE_PK3_012510.hex...
2022-11-05 10:16:09 +0100 - Hex file loaded successfully.
2022-11-05 10:16:18 +0100 - Programming...


*****************************************************


Calculating memory ranges for operation...

Erasing...

The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x3ff
program memory: start address = 0x800, end address = 0x7fff
program memory: start address = 0xec00, end address = 0xf3ff
program memory: start address = 0xf800, end address = 0xfbff
program memory: start address = 0x10000, end address = 0x15bff
program memory: start address = 0x29c00, end address = 0x29fff
configuration memory
Programming/Verify complete
2022-11-05 10:16:23 +0100 - Programming complete


*****************************************************


The following memory area(s) will be verified:
program memory: start address = 0x0, end address = 0x2abf7
configuration memory
Verification successful.


*****************************************************
*****************************************************


Connecting to MPLAB PICkit 3...

Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.56.09
Firmware type..............dsPIC33F/24F/24H
Now Downloading new Firmware for target device: PIC16F876A
Downloading bootloader
Bootloader download complete
Programming download...

Downloading RS...
RS download complete
Programming download...

Downloading AP...
AP download complete
Programming download...


Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.56.09
Firmware type..............Midrange
Target voltage detected
Target device PIC16F876A found.
Device Revision ID = 7
Loading code from .../PIC16F876A/0A7260D754/Tachometer.hex...
2022-11-05 10:19:06 +0100 - Hex file loaded successfully.
2022-11-05 10:19:17 +0100 - Programming...


Device Erased...

Programming...

The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x4cf
configuration memory
Programming/Verify complete
2022-11-05 10:19:23 +0100 - Programming complete


*****************************************************